VANCOUVER, BC / ACCESSWIRE / November 30, 2021 / Hannan Metals Limited ("Hannan" or the "Company") (TSXV:HAN)(OTC PINK:HANNF) is pleased to report an update on systematic channel sample results over a large area at the Tabalosos East prospect within the San Martin JOGMEC Joint Venture ("JV") sediment-hosted copper-silver project in Peru (Figure 1).
Highlights:
|
Michael Hudson, CEO, states "The 2021 exploration program has been transformational, as we continue to determine the scale, continuity and grades of the San Martin JV project. Ten months ago, the project consisted of high-grade copper-silver float in streams over very large areas, with a strong geological context provided by prior oil and gas exploration data. Today we have now identified strong facies controls and a mappable mineralized copper-shale horizon over large areas. We have completed a comprehensive 2,617-point soil survey and an industry-leading 782-line kilometre LiDAR survey, which have demonstrated continuity between sporadic outcrops and mapped an extensive zoned copper-silver system.
"Now with the addition of a comprehensive channel sampling program provides, the average widths and grades have context with drill numbers found during the discovery of the vast Kupferschiefer copper-silver deposits. We also note that the channel sampled area (8 kilometres by 1 kilometre) represents only 1% of our 656 sq km of tenure at the San Martin JV area. Local stakeholders support our work, and we have achieved a key milestone with the receipt of the CIRA certificate. We look forward to the start of our planned maiden drill program at San Martin during H1 2022."
Field Work Update
The results of Hannan's recent work include new channel samples and previously partially sampled channels which now have been extended and re-sampled. The systematic hand-trenching is still ongoing with assay results pending from 36 channels. A total of 42 out of 53 channels (0.5% copper lower cut) reported from August 2021 to today (Table 1) average 1.0 m @ 2.1 % copper and 29 g/t silver within an 8 kilometre long and 1 kilometre wide area (Figure 2). Previously unreported results from 25 channel samples reported here include 1.5 metres @ 4.0% copper 36 g/t silver and 1.0 metre @ 4.3% copper and 53 g/t silver (Table 1). Outcrop is extremely poor with <1% exposed rock in the area.
A total of 2,617 soil samples have been sampled across the project area. Soil line spacing varies between 100-400 meters and between 10-50 meters. Detailed geochemical sampling by handheld pXRF units has mapped a large zoned copper-silver system, where copper soil anomalies correlate well with outcrop discoveries. Zinc anomalies occur proximal to the copper mineralization whilst manganese and iron demonstrate distal behavior in relation to the copper mineralization (Figure 3).
The 782 line kilometre ("line km") LiDAR survey over 64,500 hectares at San Martin has now been completed with data analysis to be completed over the next month. Detailed lithological and structural mapping in combination with LiDAR has been used for geological interpretation and to infer the continuity of the mineralization in zones without outcrops. Field work has identified two parallel mineralized levels that have been mapped and inferred over 8 kilometres of strike. The mineralization is focused in the hinge zone and limbs of an anticline which is believed to be influenced by halokinesis from salt inflation and subsequently folding and thrusting, related to shortening during the Andean orogeny. There still remain high priority targets to be followed up (Figure 3) and field crews are working on a daily basis to advance geological understanding.
Context with the discovery of the Kupferschiefer
Sediment-hosted stratiform copper-silver deposits are among the two most important copper sources in the world, the other being copper porphyries. They are also a major producer of silver. KGHM Polska Miedz's ("KGHM") three copper-silver sediment-hosted mines in Poland (the "Kupferschiefer") were the leading silver producer in the world and seventh largest global copper miner in 2020. Quoted resources in 2019 for KGHM were 1,518 Mt @ 1.86% copper and 55 g/t silver from a mineralized zone that averages 0.4 metres to 5.5 metres thickness.
To provide context, Hannan's widths and grade (1.0 metre @ 2.1 % copper and 29 g/t silver) from 42 channel surface samples reported here at San Martin (lower cut 0.5% copper), within an area about 8 kilometre long and 1 kilometre wide, compare with those found during the initial modern-day drill discovery of the Kupferschiefer copper-silver deposits.
- In 1957 the discovery drillhole (Sieroszowice IG 1) intersected 2.0 metres @ 1.5% copper at the depth of 657 metres.
- In 1959 the Lubin-Sieroszowice deposit, based on the results from 24 drillholes contained 1,365 Mt @ 1.4% copper and 26 g/t silver in indicated resources, with a thickness ranging between 0.2-13.1 metres in an area about 28 kilometres long and 6 kilometres wide between 400 to 1000 metres depth.
Hannan's sampling, to date, has been confined to surface channel sampling.
Certificate of the Inexistence of Archaeological Remains
In other news, the Certificate of the Inexistence of Archaeological Remains (Certificado de Inexistencia de Restos Arqueológicos, or CIRA) has been approved by the Ministry of Culture from San Martin. All investment projects, whether public or private, are required to have the CIRA before starting works. This certificate is one of the requirements for exploration activities and is a requirement for the Environmental Impact Statement (Declaración de Impacto Ambiental, or "DIA") study to allow low impact mineral exploration programs, that include diamond drilling, to proceed in Peru. The CIRA is the document by which the State certifies that, in a given area, there are no archaeological remains on the surface.
The next and final step before lodgment of the DIA is to hold a public participation meeting with local stakeholders, which is expected to take place shortly. Drilling at San Martin is expected to be permitted and take place during H1 2022.
Technical Background
All samples were collected by Hannan geologists. Rock and sediment samples were transported to ALS in Lima via third party services using traceable parcels. At the laboratory, rock samples were prepared and analyzed by standard methods. The sample preparation involved crushing 70% to less than 2mm, 250g riffle split, pulverize split to better than 85% passing 75 microns. The crushers and pulverizes were cleaned with barren material after every sample. Samples were analyzed by method ME-MS61, a four acid digest preformed on 0.25g of the sample to quantitatively dissolve most geological materials. Analysis is via ICP-MS.
Channel samples are considered representative of the in-situ mineralization samples and sample widths quoted approximate the true width of mineralization, while grab samples are selective by nature and are unlikely to represent average grades on the property.
About Hannan Metals Limited (TSXV:HAN) (OTC PINK:HANNF)
Hannan Metals Limited is a natural resources and exploration company developing sustainable resources of metal needed to meet the transition to a low carbon economy. Over the last decade, the team behind Hannan has forged a long and successful record of discovering, financing, and advancing mineral projects in Europe and Peru. Hannan is a top ten in-country explorer by tenured area in Peru.
Mr. Michael Hudson FAusIMM, Hannan's Chairman and CEO, a Qualified Person as defined in National Instrument 43-101, has reviewed and approved the technical disclosure contained in this news release.
On behalf of the Board,
"Michael Hudson"
Michael Hudson, Chairman & CEO
Further Information
www.hannanmetals.com
1305 - 1090 West Georgia St., Vancouver, BC, V6E 3V7
Mariana Bermudez, Corporate Secretary,
+1 (604) 685 9316, [email protected]
Forward-Looking Statements. Certain disclosure contained in this news release may constitute forward-looking information or forward-looking statements, within the meaning of Canadian securities laws. These statements may relate to this news release and other matters identified in the Company's public filings. In making the forward-looking statements the Company has applied certain factors and assumptions that are based on the Company's current beliefs as well as assumptions made by and information currently available to the Company. These statements address future events and conditions and, as such, involve known and unknown risks, uncertainties and other factors which may cause the actual results, performance or achievements to be materially different from any future results, performance or achievements expressed or implied by the statements. These risks and uncertainties include but are not limited to: the political environment in which the Company operates continuing to support the development and operation of mining projects; the threat associated with outbreaks of viruses and infectious diseases, including the novel COVID-19 virus; risks related to negative publicity with respect to the Company or the mining industry in general; planned work programs; permitting; and community relations. Readers are cautioned not to place undue reliance on forward-looking statements. The Company does not intend, and expressly disclaims any intention or obligation to, update or revise any forward-looking statements whether as a result of new information, future events or otherwise, except as required by law.
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this news.
Table 1: Results from 42 out of total 53 channel samples from Tabalosos East reported through August 2021 to current date. Lower cut >0.5 % copper. Channel samples average of 1.0 metre @ 2.1% copper and 29 g/t silver.
Channel ID | Width (m) | Cu % | Ag g/t | Reported date |
23760 | 2.0 | 4.9 | 62 | |
3861 | 2.8 | 3.3 | 49 | |
3803 | 2.2 | 4.1 | 47 | |
23999 | 1.2 | 5.4 | 62 | |
109 | 1.5 | 4.0 | 36 | here |
3823 | 1.3 | 3.5 | 86 | |
3892 | 1.0 | 4.3 | 53 | here |
23758 | 2.6 | 1.1 | 12 | here |
102 | 3.1 | 0.8 | 10 | here |
4310 | 0.9 | 2.7 | 39 | here |
23793 | 1.0 | 2.3 | 21 | here |
3862 | 2.0 | 1.1 | 14 | |
23992 | 2.0 | 1.0 | 19 | here |
4313 | 1.7 | 1.2 | 27 | here |
3888 | 0.8 | 2.3 | 24 | |
118 | 0.8 | 2.3 | 24 | here |
3896 | 1.0 | 1.7 | 19 | here |
23780 | 0.2 | 6.9 | 89 | here |
4309 | 0.4 | 3.4 | 30 | here |
114 | 0.6 | 2.2 | 43 | here |
3819 | 0.5 | 2.6 | 53 | |
3821 | 1.8 | 0.7 | 12 | |
23781 | 0.2 | 6.0 | 63 | here |
23784 | 0.6 | 1.8 | 30 | here |
23993 | 0.5 | 2.0 | 35 | here |
3814 | 1.2 | 0.8 | 16 | |
23787 | 0.7 | 1.3 | 13 | here |
4516 | 0.2 | 6.1 | 158 | here |
3806 | 1.0 | 0.9 | 9 | |
3846 | 1.0 | 0.9 | 10 | here |
4507 | 0.4 | 2.1 | 29 | here |
23998 | 0.7 | 1.0 | 11 | |
23991 | 1.2 | 0.5 | 7 | here |
3858 | 0.2 | 2.2 | 27 | here |
23762 | 0.4 | 1.0 | 19 | |
23786 | 0.5 | 0.8 | 9 | here |
23789 | 0.7 | 0.5 | 4 | here |
7 | 0.5 | 0.6 | 8 | here |
23778 | 0.2 | 1.2 | 12 | here |
4508 | 0.4 | 0.6 | 7 | here |
3853 | 0.4 | 0.5 | 8 | here |
106 | 0.2 | 0.8 | 18 | here |
SOURCE: Hannan Metals Ltd.