TORONTO, ON / ACCESSWIRE / May 9, 2022 / Gratomic Inc. ("Gratomic", "GRAT," or the "Company") (TSXV:GRAT)(OTCQX:CBULF)(FSE:CB82) announces that 2,047.5 m of the 5,000-meter drilling campaign on its Capim Grosso graphite project has been completed. 17 diamond drillholes were completed to date, with two additional holes in progress. The project is located in the Bahia State of Brazil, with the Company holding a 100% controlling interest in the property.
Table 1: Drillholes completed to date on the Capim Grosso Project in Brazil (WGS84 UTM 24S)
NAME | X | Y | Z | AZIMUTH | DIP | EOH |
CGD001 | 391942 | 8749876 | 381 | 45 | -58 | 100.10 |
CGD002 | 391867 | 8749905 | 382 | 50 | -60 | 141.20 |
CGD003 | 391926 | 8749863 | 381 | 50 | -60 | 120.55 |
CGD004 | 391842 | 8749975 | 381 | 50 | -60 | 93.15 |
CGD005 | 391775 | 8750076 | 378 | 50 | -60 | 111.00 |
CGD006 | 391722 | 8750171 | 378 | 50 | -60 | 120.65 |
CGD007 | 391626 | 8750343 | 375 | 50 | -60 | 120.20 |
CGD008 | 391755 | 8750196 | 376 | 50 | -60 | 100.05 |
CGD009 | 391603 | 8750328 | 376 | 50 | -60 | 120.00 |
CGD010 | 391597 | 8750372 | 375 | 50 | -60 | 141.00 |
CGD011 | 391574 | 8750352 | 376 | 50 | -60 | 140.05 |
CGD012 | 391533 | 8750454 | 373 | 50 | -60 | 134.65 |
CGD013 | 391431 | 8750595 | 373 | 50 | -60 | 140.70 |
CGD014 | 391392 | 8750562 | 376 | 50 | -60 | 151.00 |
CGD015 | 391336 | 8750756 | 371 | 50 | -60 | 206.90 |
CDG016 | 391317 | 8750785 | 371 | 50 | -60 | 151.50 |
CDG017 | 391294 | 8750765 | 372 | 50 | -60 | 162.05 |
The second batch of its drillhole assays from the Capim Grosso Project has been received from SGS Geosol in Brazil which included the following:
- 60 assays, which includes 3 internal Certified Reference Materials
Table 2: Table 2 highlights intervals from drill holes 9, 10 and 11 on the Capim Grosso Project in Brazil (1 % TGC cut-off grade and 3 % minimum TGC grade used). More detailed information of the assay results from the 3 holes is set out in Table 3 below. Internal QA/QC was performed by Gratomic inserting a Certified Reference Material (CRM) every 20 samples, (OREAS 725) which assayed within 97 % of the expected graphitic carbon value of the CRM. The QP therefore accepts the values of the laboratory assays. The intervals are regarded as true width (or as close as possible to) due to the dip of drillholes being perpendicular on measured dip of geology.
DH_Hole | DH_From (m) | DH_To (m) | Length (m) | Total Graphitic Carbon (TGC) (%) |
| CDG009 | 68.50 | 71.16 | 2.66 | 9.12 |
71.25 | 71.75 | 0.50 | 5.34 | |
105.71 | 111.08 | 5.37 | 5.29 | |
| CGD010 | 3.45 | 4.05 | 0.60 | 3.88 |
91.65 | 94.75 | 3.10 | 4.83 | |
48.20 | 49.14 | 0.94 | 8.63 | |
91.65 | 94.75 | 3.10 | 4.83 | |
95.75 | 96.75 | 1.00 | 4.45 | |
97.65 | 99.85 | 2.20 | 8.88 | |
| CDG011 | 85.16 | 92.05 | 6.89 | 12.02 |
136.75 | 137.75 | 1.00 | 15.17 |
SGS Geosol's graphitic carbon assay methods and equipment include the LECO carbon-sulphur analyzer and high temperature combustion infrared detection. During this procedure, the carbon in the sample is converted to carbon dioxide CO2, which is then measured by infrared (IR) detectors.
Table 3: The table below presents the Total Graphitic Carbon (TGC) (%) assay results obtained from the further 3 drillholes completed to date on the Capim Grosso Project in Brazil (all drillholes to date have intersected graphite). Drillcore was halved and samples taken according to visual grade estimation in one meter increments. Where visual grade was regarded as continuous, sampling was completed up to a maximum of 2 m increments. Internal QA/QC was performed by Gratomic inserting a Certified Reference Material (CRM) every 20 samples, (OREAS 725) which assayed within 97 % of the expected graphitic carbon value of the CRM. The QP therefore accepts the values of the laboratory assays. The intervals are regarded as true width (or as close as possible to) due to the dip of drillholes being perpendicular on measured dip of geology.
HOLE | FROM (m) | TO (m) | INTERVAL (m) | SAMPLE # | TGC (%) |
CGD009 | 66.67 | 67.55 | 0.88 | X6778 | 1.25 |
67.55 | 68.50 | 0.95 | X6779 | 2.62 | |
68.5 | 68.65 | 0.15 | X6780 | 11.15 | |
68.65 | 69.90 | 1.25 | X6781 | 6.50 | |
69.70 | 70.55 | 0.85 | X6782 | 10.06 | |
70.55 | 71.16 | 0.61 | X6783 | 8.76 | |
71.16 | 71.25 | 0.09 | X6784 | 2.19 | |
71.25 | 71.75 | 0.50 | X6785 | 5.34 | |
80.05 | 80.17 | 0.12 | X6788 | 1.07 | |
105.71 | 105.95 | 0.24 | X6794 | 4.73 | |
105.95 | 106.44 | 0.49 | X6795 | 4.62 | |
107.55 | 108.17 | 0.62 | X6796 | 3.60 | |
108.85 | 109.85 | 1.00 | X6797 | 3.98 | |
109.85 | 111.08 | 1.23 | X6798 | 9.51 | |
CGD010 | 3.45 | 4.05 | 0.60 | X6799 | 3.88 |
47.29 | 48.20 | 0.91 | X6803 | 2.83 | |
48.20 | 49.14 | 0.94 | X6804 | 8.63 | |
64.35 | 64.98 | 0.63 | X6805 | 2.83 | |
87.35 | 88.60 | 1.25 | X6807 | 2.88 | |
91.65 | 92.65 | 1.00 | X6808 | 3.06 | |
92.65 | 93.65 | 1.00 | X6809 | 4.09 | |
93.65 | 94.75 | 1.10 | X6810 | 7.33 | |
94.75 | 95.75 | 1.00 | X6811 | 2.74 | |
95.75 | 96.75 | 1.00 | X6812 | 4.45 | |
96.75 | 97.65 | 0.90 | X6813 | 2.74 | |
97.65 | 98.65 | 1.00 | X6814 | 10.22 | |
98.65 | 99.85 | 1.20 | X6815 | 7.54 | |
CGD011 | 85.16 | 86.16 | 1.00 | X6819 | 8.84 |
86.16 | 87.16 | 1.00 | X6820 | 15.50 | |
87.16 | 88.16 | 1.00 | X6821 | 13.70 | |
88.16 | 89.16 | 1.00 | X6822 | 16.28 | |
89.16 | 90.16 | 1.00 | X6823 | 12.67 | |
90.16 | 91.16 | 1.00 | X6824 | 12.91 | |
91.16 | 92.05 | 0.89 | X6826 | 4.24 | |
135.75 | 136.75 | 1.00 | X6832 | 2.12 | |
136.75 | 137.75 | 1.00 | X6833 | 15.17 |
Previous results from trenching and drilling at Capim Grosso can be found in our previous press release.
Qualified Persons
Steve Gray, P. Geo. has reviewed and approved the scientific and technical information in this press release and is the Company's "Qualified Person" as defined by National Instrument 43-101 - Standards of Disclosure for Mineral Projects.
About Gratomic
Gratomic is a multinational company with projects in Namibia, Brazil, and Canada. The Company is focused on becoming a leading global graphite supplier and aims to secure a strong position in the EV (Electric Vehicle) battery supply chain. With the continued development of its flagship Aukam project and further exploration on the Company's Capim Grosso property, Gratomic sets itself apart by seeking out unique top-quality assets around the world. True to its roots, the Company will continue to explore graphite opportunities displaying potential for development. The Company ranked third place in the top 10 preforming mining stocks on the 2022 TSX Venture 50™.
Large quantities of high-quality vein graphite have been shipped for testing to confirm its viability as an anode material. Gratomic is confident that the test results will provide a unique competitive advantage in its desired target markets. The Company will continue to update the public on the status of these tests and will provide results as soon as they become available.
The Company has formed a collaboration agreement with Forge Nano. With its patented ALD (Atomic Layer Deposition) coating, this cooperation with Forge Nano is a key element to support Gratomic's strategies towards the value-added phases of production of graphite for anode applications, namely micronization, spheronization and coating, making Gratomic graphite a preferred choice for use in lithium-ion batteries.
For more information: visit the website at www.gratomic.ca or contact:
Arno Brand at [email protected] or (416) 561- 4095
Subscribe at gratomic.ca/contact/ to be added to our email list.
For Marketing and Media information, please email: [email protected]
"Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release."
Forward Looking Statements:
This news release contains forward-looking statements, which relate to future events or future performance and reflect management's current expectations and assumptions. Such forward-looking statements reflect management's current beliefs and are based on assumptions made by and information currently available to the Company. Investors are cautioned that these forward-looking statements are neither promises nor guarantees and are subject to risks and uncertainties that may cause future results to differ materially from those expected. These forward-looking statements are made as of the date hereof and, except as required under applicable securities legislation, the Company does not assume any obligation to update or revise them to reflect new events or circumstances. All of the forward-looking statements made in this press release are qualified by these cautionary statements and by those made in our filings with SEDAR in Canada (available at www.sedar.com)
SOURCE: Gratomic Inc.